We do not ship internationally as our stands weigh a significant amount and shipping costs often exceed the cost of the stand. Please contact our Canadian Dealer, ErgoCanada.com

Our LEVO G2 Table Clamp Tablet Stand is a complete stand that attaches to a table. If you're looking to replace your bungee platform with our newer tablet holders, you will want to order our dual-clamp tablet holder, item 33707. If your stand uses height adjustment levers to raise and lower the vertical post, this holder is compatible. If your stand has a curved vertical pole, it is not compatible. Please email us images if you are unsure.

The box dimensions for our LEVO G2 Table Clamp Tablet stand are 19 x 10 x 4.5 inches and approximately 4.55 lbs

We do not offer longer swing arms for any of our stands as they are counterbalanced by their bases and changes or modifications could cause them to tip. The horizontal arm on our V16 hovers over and in between the V shaped base at approximately 90 degrees. Our stands with square and hourglass bases are much heavier and allow for a 360-degree horizontal arm rotation. If you were to switch out the arms, your stand will likely tip over.

If you currently own a LEVO G2 Deluxe Table Clamp Tablet Stand with the bungee platform, then you can use the LEVO Dual Clamp Tablet Cradle. Here is the link to purchase this accessory: https://levostore.com/products/levo-dual-clamp-tablet-cradle-for-levo-g2-tablet-stands?_pos=2&_sid=359490833&_ss=rThe attachment arms are designed the same so you can interchange them.

The maximum clamping capacity for our dual clamp is 13" x 8.6" x .85". We recently designed new clamping ends to support thicker cases, but we have not modified the dual clamp to support your case. The dual clamping tablet platform replaced our older bungee style platform. We made this change based on customer suggestion. We still have a few bungee platforms in our warehouse, though. This will support your tablet with the case on. You will need to contact us by email if you are interested. We do not offer this platform for sale on our site.

This depends on the furniture you attach it to. If your furniture is at least 20lbs, the LEVO G2 Table Clamp Tablet Stand can hold up to four pounds. The maximum weight the horizontal arm can support is 7lbs but their must be a sufficient counter balance.

All LEVO G2 Tablet Stands now come with the dual clamping tablet holder. The only tablet stand with a bungee platform is the LEVO G1 Table Clamp Tablet Stand. We are in the process of updating our site and videos to refect this change.

The horizontal reach measured from the center pole to the center of the tablet platform is 24 inches. If you cannot slip the base under your furniture, the horizontal reach is 18 inches measured from the edge of the base to the center of the tablet platform.

The LEVO G2 Table Clamp Tablet Stand can be tilted parallel to the floor allowing for one to read while laying supine.

Thanks for your interest in LEVO. The arm on this unit is too long and cannot safely support a laptop. We have thoroughly tested this. The arm on the laptop stand is 14". We have 17" arms in our headquarters that you can purchase. If you are interested, please email us your billing and shipping address and if you want to pay by PayPal or credit card. Our email address is sales@levostore.comRespectfully, Erica

The LEVO G2 Table Clamp Tablet Stand is compatible with the LEVO Book Platform Kit https://levostore.com/products/levo-g2-book-platform-kit

The LEVO G2 Table Clamp Tablet Stand was designed to attach only on flat horizontal surfaces with an overhang as little as a 1/4 inch and no thicker than 1.6 inches.

We recommend that The LEVO G2 Table Clamp Tablet Stand be used only on flat surfaces. We designed a treadmill extender for our LEVO G2 Deluxe Stand, though. https://levostore.com/products/levo-g2-deluxe The maximum height for this stand is 56" but the extender increases it to 72" making it perfect for treadmills. Here is a direct link: https://levostore.com/products/levo-g2-height-extender

Hello. You can order now! We are in the process of upgrading this item to our new Dual Clamp, but they won't be available until late February. In the mean time, we created a discount code that you can use now when you order both 33764 and 33707 (LEVO G2 Table Clamp & Dual Clamp). Our new price will be $79.99. With your disount code, your price now will be the same. To get your discount, 1. add both items to your cart2. click through our checkout process and be sure to add discount code LEVOdualUp Happy New Year

We will, but expect it to happen over after the New Year. I can send you an email when they are available. Respecfully, Erica

We've tried to find a "universal" clamp that will work with wheelchairs.  We have not found a good solution yet. Do you remember the name of the company that you purchased the unit you mentioned which broke?

Hi. Yes! To remove sagging, simply weave your bungee a second time to take up the slack. In the attached link, take a look at step#3.https://gyazo.com/a34f861f2caf53327a24063e29b482b0 

You can use the LEVO G2 Table Clamp Tablet Stand to view your tablet at eye level on most end tables as the maximum height is 16.5 inches measured from the top of the table to center of the device.

Hi Dana. Thanks for your question. While designing the item, we made the horizontal extension as long as possible before it would start bouncing too much while you surf. Also, if the extension gets longer, it will put too much force on the furniture in which the clamp is fixed.All that said, we don't make an extension. Maybe there is a different resolution. If you send me a photo of your setup, I might have some ideas. Maybe you can clamp to something that can be arranged closer to your chair.Let me know what you work out.Best,Dave