What can we help you with?
Our Dual-Clamp Tablet Holder's maximum clamping capacity is 13.5 x 9.25 x .75 inches. It is on all our tablet stands except our Commercial Stand with Power. Our dual clamp works with almost all tablets and their cases. For mobile phones, you can secure with two of the four clamping ends.
Yes, our stands are specifically designed for use on both the left and right sides of your furniture.
While most clamps require a tabletop overhang of up to 2 inches, our patent-pending "V" clamp can attach to corners of tables less than 1.6 inches with overhangs as little as 1/4 of an inch allowing you to clamp on to nearly any table or counter in the home or office.
Yes, our dual cradle tablet holder on all of our tablet stands can pivot to face the ceiling, the ground, and any angle in between.
Our Deluxe Book Stand is designed to hold books weighing four pounds or less. The horizontal arm can support up to seven pounds. For books weighing more than four pounds, we recommend adding a counterbalance to the base of the stand to prevent it from tipping.
Our G2 Book Holder Floor Stand's Book Platform Kit has spring-loaded page holders that you lift to release the page to turn them. Below is a video demonstrating one-handed page turning.
Yes, our Book Platform Kit can pivot all the way forward so you can use it while lying completely flat on your back. You may consider ordering another set of page holders found at the link to keep all four corners of your book flat when using it supine.
Yes, our stands are specifically designed for use on both the left and right sides of your furniture

Our laptop stands are designed to hold laptops up to 16 inches and up to five pounds.
Our Dual Clamp tablet holder is compatible with all our laptop stands. These mounts are interchangeable, but we are designing a dual arm for our Deluxe Laptop Stand 801 so you can mount both devices simultaneously.
Attaching our desktop trays to our Deluxe Tablet and Book Stands is unsafe. Our laptop stands are specially designed to support laptops safely. Below is a side-by-side comparison of both stands.
Yes, and can be adjusted with a turn knob. Our mouse tray has a small ledge around its border to help prevent the mouse from sliding off. The mouse tray should be used horizontally as no locks are securing your mouse to the mouse tray.
Our Book Kit, item 33715, is compatible with our V16 Laptop Stand, item 33742. The kit has two-page holders, two Velcro straps, and two-page plates. You attach this kit to the desktop tray, and you can leave it connected to the tray when using your laptop. The page holders are specially designed to collapse out of the way when using your laptop. Simply remove your laptop when you would like to attach your book. It is not compatible with our Gooseneck Tablet Stand.
Our Book Platform Kit, item 33701, is designed as an interchangeable mount for our tablet stands and our Deluxe Laptop Stand 801. It is not compatible with our Gooseneck Tablet Stand.
If you would like your stand to hold your laptop, you must choose from our laptop stands, as they were designed to hold laptops. You can add accessories to hold tablets and books. If you do not need your stand to hold a laptop, you can choose from our tablet or book stands.
-
Prepare the Metal Flip Bracket
Open the metal flip bracket, as shown in the second image. Once open, close it again temporarily to secure the cord in place. -
Insert the Cord into the Tray
Thread the cord through the designated holes on the top of the laptop tray. -
Secure the Cord
Flip the metal bracket open to prevent the cord from slipping back through the holes, as illustrated in the third image. -
Position the Plungers
Place the plungers at the apex where your laptop screen meets the keyboard. -
Important Safety Note
Do not close your laptop screen while the cord is in place on the stand. Doing so may damage the cord or your laptop.
Sometimes the U-bracket is positioned in a way that prevents the tray from tilting or swiveling properly—both issues can be easily corrected.
Below is an image of the underside of our desktop tray. The white piece is the U-bracket, and the tray tilts on the hinges indicated by the red arrows. The leveling knob should be positioned on the inside of the U-bracket and must pass through two aligned holes: one on the white U-bracket and another on the adjacent metal piece highlighted in yellow.
In many cases, the knob is inserted from the wrong direction or the bracket has been rotated, preventing it from passing through both holes. This can be adjusted manually by repositioning the bracket so the knob aligns properly.

Our Commercial Tablet Stand has two locks on the back of the tablet holder. One is a slide lever to lock and unlock the arms of the tablet holder and the other is a push button antitheft lock. If the push button lock is pushed in, the slide lever will be locked. You will need to unlock the push button lock with the tubular provided keys. If you have lost your keys, we offer them in this set. Click KEYS
-
Cable Connections: Please ensure all cables are connected correctly, as shown in your owner's manual.
-
AC Cord Fit: Check that the AC cord is fully inserted into the base. If it feels loose or does not fit snugly in the receptacle, let us know.
-
USB Insertion: It’s normal for the USB plug not to insert fully into the port—it should stay in place when the stand is stationary and not fall out on its own.
-
Wall Outlet: Confirm that the wall outlet you're using is working properly.
-
USB Cord Compatibility: This is a 60W High-Speed USB charger. Make sure your USB cord is rated to handle this level of power.
-
Power Indicator: Once everything is connected and the stand is plugged into a working outlet, look for a blue light under the USB charging port on the underside of the horizontal arm. If you see the blue light, power is running through the stand. If your device still isn’t charging, your USB cord may not be compatible.
Per UL Listing requirements the horizontal arm on this stand is locked to protect the internal wires. The arm articluates at the elbow.
The roll joint on our Dual Clamp Tablet Holder may feel stiff when pivoting it downward for the first time. Don’t hesitate to use firm pressure—it’s designed to handle it without breaking! We intentionally asked our factory to make the pivot tight to ensure stability, but it will ease up with use. Rest assured that a three-year warranty covers your LEVO for added peace of mind.
To determine what casters you need please look on the underside of the base where the casters are inserted and choose from the below options.
G2 Stands -These stands have height adjustment levers to raise and lower the vertical post.
If your LEVO uses a turn cap that attaches the vertical column to the base, you will need 8 mm casters. This is part # 0011. https://levostore.com/products/caster-for-tablet-levo-stands?_pos=2&_sid=bf2e0689b&_ss=r
If your LEVO uses a big metal bolt that attaches the vertical column to the base, you will need 11 mm casters. This is part # 0071. https://levostore.com/products/locking-casters-for-levo-laptop-workstation?_pos=1&_sid=bf2e0689b&_ss=r
If your LEVO uses a big metal bolt and your stand has USB charging capabilities, you will need our Commerical casters. This is part # 0103. https://levostore.com/products/caster-2-inch-industrial-with-lock-11mm-d-shaft?_pos=1&_sid=902391ee7&_ss=r
If you have a Gooseneck Stand you will need 11 mm casters. This is part # 0071. https://levostore.com/products/locking-casters-for-levo-laptop-workstation?variant=40886179463237
G1 Stands - These stands are our original series and have a Shepards Hook at the top of the vertical post. These stands use 8.0 mm casters. This is part # 0011: https://levostore.com/products/locking-casters-for-levo-laptop-workstation?variant=40886179463237
Our Dual Clamp Tablet Holders are compatible with our G2 Stands. Our first stands were G1s. They are not compatible with our dual-clamp tablet holders. G1 Stands use a height adjustment turn knob to raise and lower the height, and the top of the vertical post had a Shepard's Hook. G2 Floor Stands use height adjustment levers that you open and close to adjust the height.
Our dual-clamp tablet holder supports almost all tablets and cases. Two of the four clamping ends can be used for smaller tablets, such as cell phones and Kindle Minis. The holder holds tablets 5 1/8 to 9 3/8 on the short side and 7 5/8 to 13 ½ on the long side. The maximum depth is ¾ of an inch.
Yes, but you will first need to remove the laptop tray to use the dual cradle. We will be creating a dual arm for model 33801.
Our bungees are part 33600 and they can be found at this link: Click Here
These are used to secure the four corners of your tablets to the bungee platforms found on our previous tablet stands.